Topkit Tower Crane 6t

1. The performance parameters and technical indicators are leading domestically, with a maximum working range of 57m and a maximum lifting torque of 95.4t.m.

2. There are multiple working methods and a wide range of applications. This machine has working modes such as a fixed underground pouring foundation and external wall attachment, suitable for using various construction objects. The lifting height of the independent type is 40.5m, and the attached type is an additional addition to the independent type the standard section and attachment device of the tower body can be achieved, and the lifting height can reach 160m. Special requirements can increase it to 220m.

3. High working speed, good speed regulation performance, stable and reliable operation.

4. The safety devices are complete and designed for mechanical or electromechanical integration to ensure the reliable operation of the tower crane.

5. To improve the technical level of the entire machine, the following mature and reliable advanced technologies at home and abroad were adopted in the design:

a. Two sets of rotary mechanisms adopt a winding motor and planetary reducer model, with smooth starting and braking, no impact, accurate positioning, and safety fully reliable;

b. The main electrical components of the electronic control system use Schneider products, which work reliably;

c. Adopting advanced foreign technology and domestically produced lifting capacity limiters, torque limiters, height limiters, amplitude limiters degree limiters, and rotary limiters;

d. Equipped with a small car anti-break rope (anti-slip car) protection device and an anti small car axle breakage and anti-fall protection device;

e. The driver's cab is independently located outside, with good visibility and large internal space, creating a good working environment for the operator;

f. By using a rotary limiter and eliminating the central collector ring, common problems such as rain, moisture, short circuit, and leakage are overcome when there is a collector ring. The defect of the malfunction also facilitates the driver's up-and-down passage from the middle of the tower crane;

g. The driver's cab adopts an advanced linkage console to control the actions of various mechanisms, which is easy to operate and easy to maintain.

6. Using a hydraulic lifting system to increase or decrease the height of the tower body, allowing the tower crane to rise with changes in the height of the building high or low to adapt to different buildings.

Weight: the weight of the underground section without load and ballast with the longest jib and maximum free-standing height.

●Concrete foundation: A solid foundation enables crane operators to secure large structures and ensure their stability.
●Boom: This component is the long main lever arm of a construction crane. It is one of the most recognizable parts of a crane and moves loads from one point to another through different heights.
●Hook: The hook is the hanging component of a crane that supports and lifts heavy objects. The hook must be strong enough to withstand the weight it carries. Suspending the cargo on multiple hooks helps to spread the weight and minimize the risk of the hook breaking during the lifting process.
●Winches: This component is located on the boom of a crane and consists of a wire rope and a drum. The winch is attached to the hook to assist the vertical lifting mechanism of the crane.

Hot Tags: topkit tower crane 6t, China topkit tower crane 6t manufacturers, suppliers, factory, tower crane load moment, tower crane capacity, tower crane dismantling, tower crane parts, tower crane hook, tower crane accessories